Skip to content
Prospaplans Ltd logoPROSPAPLANS

Land & Engineering

Level Surveys & Site Gradients

Accurate spot levels and the falls between them. On Kent's clay, the difference between a fall you designed and a fall you measured is the difference between a drainage scheme that works and one that ponds every winter.

Typical accuracy · ±8mm vertical on control, typically ±10mm on spot levels over short baselines.

Digital level and staff reading a benchmark
CRAIBROOK · FALLS AND PROFILES

When you need it

  • →You are designing a drainage or attenuation scheme and need real falls.
  • →Subsidence or heave is suspected and you need a level baseline to prove movement.
  • →Retaining walls, embankments or platform levels need verifying.
  • →A previous survey is being disputed and the levels do not agree.

What you get

  • Spot level schedule on a fixed grid
  • Cross-falls and gradients at the point of interest
  • Benchmark and control documentation
  • Profiles along specified lines
  • Comparison against design levels where you supply them

How it runs

  1. 01

    Confirm the benchmark and the levels you are measuring against.

  2. 02

    Survey a close-spaced level grid appropriate to the ground conditions.

  3. 03

    Close the levelling run and prove it before leaving site.

  4. 04

    Issue the schedule with a clear note of the datum used.

Horizontal control
±10mm typical
Vertical control
±8mm typical
Datum
OSGB36 · EPSG:27700
Area covered
Norfolk base · 6 regions

Questions we get asked

Why is Kent clay specifically a problem?

Shrink-swell clay moves seasonally. A slope that is adequate in summer can hold water in winter. That is why a level survey of the actual ground is worth more here than a desktop assumption.

Where we cover

Norfolk based, working nationwide. Site-based surveying, so distance is rarely the constraint.

Most requested in Norfolk, Kent & Medway, Suffolk, Cambridgeshire & Essex, Lincolnshire & the Midlands.

Every town, district and borough we cover is listed in full on each region page. See the full service area.

All 18 other services

Topographic & Land SurveysLevels, contours and site detail for planning, design and construction.Measured Building SurveysMeasured floor plans for architects, conveyancing and party wall work.Boundary & Site ControlBoundary definition and setting-out control to RICS standard.Expert Witness & Boundary Dispute ReportsIndependent evidence for boundary disputes and neighbour conflicts.Drainage & Flood Risk SurveysFlood zone assessment and drainage run-off measurement.Engineering Surveys & Setting-OutPrecision setting-out, control and dimensional checks on site.Construction Progress MonitoringRegular site measurement tracking progress, volumes and change.As-Built & Completion SurveysFinal measured records for handover and compliance sign-off.Drone PhotogrammetryAerial reconstruction producing accurate 3D models and imagery.Aerial Mapping & OrthomosaicsGeoreferenced, distortion-free imagery from a single flight.Point Clouds & 3D ModelsDeliverables in E57, LAZ, LAS, IFC and XYZ for your software.Volumetric & Stockpile SurveysInstant stock tonnage, cut and fill volumes from measured data.LiDAR & 3D Laser ScanningMillimetre-accurate point clouds that reach beneath vegetation.Biodiversity Net Gain SurveysBNG baseline, condition and monitoring evidence from the air and the ground.Multispectral & Agricultural SurveyNDVI and NDRE analysis to reveal crop stress and irrigation issues.Roof Surveys & Aerial InspectionsCondition surveys of roofs and structures without scaffolding.Dropped Object InspectionRecorded and verifiable inspection regime for dropped objects.Thermal & Insulation InspectionLocate heat loss, failed insulation and water ingress before it spreads.

Start here

Send the address and what it is for.

You will get a straight answer on whether this survey is the right one, and what it should cost. If it is not, we will say so.

info@prospaplans.com · Norfolk, Kent, London, East Anglia and the Midlands

CallGet a quote